This article compare OBDSTAR X300 DP Plus to Lonsdor K518 and XTOOL X100 PAD2.
OBDSTAR X300 DP Plus:
Obdstar makes X300 DP Plus and the VCI adapter in one machine. No need
worry you forget to take the VCI if you’re out. And the built-in VCI box
offers more stable communication.
X300 DP Plus comes with 8-inch touch screen, which offers better visual experience
3 adapters are integrated into the X300 PAD Plus: EEPROM /PIC 2-in-1
adapter, RFID adapter (VW Audi 4th / 5th IMMO programming and other cars
e.g Porsche, BMW, Fiat etc.) and Renew Key PCF79XX adapter.
ECU cloning means copy ECU, that is the OBDSTAR X300 DP Plus copies
the data from the original car ECU, then write it into another same ECU
hardware, so that it can achieve the same function as the original ECU.
When you want to change the new ECU or the second ECU, if you use
X300 DP Plus to clone via OBD, you won’t need to go to the 4s store to
do the online programming or dismantle ECU to weld, read & write.
ECU clone Pros :
No need to go to 4S shop, convenient, fast and save money.
Simplify the operating steps, even the amateur can also operate.
No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.
XTOOL X100 PAD2:
For me obdstar x100 is working very well with hyundai /kia It able to
calculate pin code from vin before 2007 after you will buy a pin from a
code dealer. The Renault part is a mess, forget it. Sometimes the pin
code is working but mostly not and there is lot of bugs like the laguna 2
the readed pin code is correct but impossible to enter/accept it.
Lonsdor K518:
Lonsdor K518ISE Key programmer vehicle coverage has no feedback yet,
this one looks interesting but only time will tell. From what you’ve
read, you will find this Lonsdor k518ISE is a little better than AVDI
for a lot less the money. It is also twice the money of OBDStar X300 DP
and Xtool tablets.
No comments:
Post a Comment