how to use OBDSTAR H110 Program Key for VW Polo 2013 NEC 24C32

Recently,OBDSTAR engineer share video guide on how to use OBDSTAR H110 programmer program dealer key for VW Polo 2013 NEC 24C32.Here OBDSTAR share it for customers.

OBDSTAR X300 PAD2

Procedures:
Connect OBDSTEAR H110 to vehicle by OBD port.
Power on the device.
Select “VEHICLE”

Select “IMMOBILISER”

Select”VW/AUDI/SKODA/SEAT”

Select “VW/ADUI/SKODA/SEAT V33.25”

Select “VW”

Read security code

4 Generation Immo

NEC+24C32 ICM

Make Ordinary Dealer Key.

Reading data …
Please connect RFID with diagnostic device

Please put the new key in RFID adapter.


Reading data …
Generating dealer key…

When you find the LED light on the RFID adapter flash on 3 time,the OBDSTAR H110 Programmer will prompt you “Make Dealer key success”


Attention Please:
If you find the warning massage with “Communication Breakdown”.Please check below conditions:
1.Ignition Switch is turned on
2.Mainline is connected
3.Battery has power
4.Is Equipped with this ….

http:www.uobdii.com