Recently,
UOBDII.COM enginner has tested
OBDSTAR F100 Auto Key Programmer on Ford Focus 05,and make key successful.Now we share it here,hope it can help people who need.
Generally speaking,
OBDSTAR F100 is very easy to use, just do what it prompts on the screen. It won’t require for password during the whole operation.
FYI, the dealer code is 860010A1
Car Model: Ford Focus 05Procedure:
Step 1: Use Quickly Code Reader to test the original transponder key. First insert the key into coil and choose “Read/ Copy” option on screen (pay attention do not move the key), then I read the chip type is 83.
Step 2: Test a new transponder key and repeat choose “Read/ Copy” option to read chip type, it’s 4D 70, then I try to start the car by this new key sure it’s not working.
Step 3: Use Magic Wand to format the new chip 4D 70 to 83.(Put the new key into key slot, input 83 and press “Write” button)
Step 4: Insert the new key while keeping ignition on then put Magic Wand coil close to ignition.
Step 5: Use OBDStar F100 to program new key. Enter “Operation Menu”, find “Programming Anti-theft Transponder Key”, and choose car brand and type. The screen show it’s initializing.
Step 6: Choose car brand, enter “Smart Key System”, then choose “Focus”→ “New Focus”→ “Type 2”.(Since this car is 2015Focus, I choose “2014~”)
Step 7: Choose “Programming a New Key”, insert the new key and turn on ignition, press “Enter” to continue. At this time, tips show on screen that it is reading pin code.
Step 8: Follow next step to turn off ignition and turn on it again (In all steps above you should keep the new key into coil.). Tips show that I have 4 available keys. Press “Enter” to make sure it.
Step 9: Follow tips to program a new key, it will take about 4 mins. Soon I get the pin code, press “Enter” to continue. Tip show now I have 5 available keys to start the car. And I use the new key to start car, it’s working
More info:
http://www.uobdii.com/wholesale/obdstar-f-100-mazda-ford-auto-key-programmer.html
No comments:
Post a Comment